home
about
news
product
case
contact
message
When decorating a house, whether or not to do tile joints at home has always been a big controversy. Some people think it is not necessary to do it, and some people think it is necessary to do it! ! ! So some people who want to do ceramic tile caulking at home will ask: How do you do your own ceramic tile caulking? Can I do the tile joints myself? Well, let’s take a look at today’s topic! ! !
If you have ever seen how a decorator makes beautiful seams on site, you will know that the beautiful seams of ceramic tiles are actually very simple, and of course you can do it yourself. The steps to make beautiful seams on your own ceramic tiles are as follows:
1. Clean the gaps
Before making the seams, you need to clean out the dust and cement slurry in the gaps between the tiles to ensure that the seaming agent can enter the gaps. When cleaning the gap, you only need to clean it to a depth of about 3mm.
2. Clean the dust on the surface of the tiles
In order to prevent water stains and dust on the tiles from entering the gaps during construction, the surface of the tiles must be cleaned before making the joints to avoid affecting the curing effect of the joint sealant.
3. Glue and seam
Gluing is something that most people find difficult. In fact, if you really master the key points, it is not that difficult to do.
(1) If the ceramic tile surface is rough, you need to apply textured paper. If it is smooth, you can apply glue directly. (You can also apply some seaming wax appropriately before gluing.) This is a magic tool. There is no need to apply textured paper to the antique tiles, and it can be easier to polish the glazed tiles!
(2) Install the glue gun on the glue gun. After the paint is mixed evenly, you can apply glue to the gap. (Both hands must be steady when using the glue gun, especially when caulking the wall.)
(3) After gluing, use a seaming ball to press the seams!
4. Glue shoveling
If there is textured paper on the tiles, it needs to be peeled off within 30 minutes after the caulking is completed. After the caulking agent has solidified, use a glue shovel to remove the excess caulking agent.
Note: The best result is to wait a day before applying glue
So after reading the above steps for tile seaming, do you think that tile seaming is actually quite simple? But it is a test of patience, and it is a meticulous work. Okay, then the above content is the content of the article that the editor shared with you today about How to make beautiful seams on your own ceramic tiles. I hope it will be helpful to you!
Copyright © 2011 boron nitride ceramics factory,boron nitride ceramics manufacturer,boron nitride ceramics company,boron nitride ceramics price,boron nitride ceramics oem middia All Rights Reserved.XML map