I think all decorators know what tile grout comes from, but there are still a few people who don’t know. So in the following time, let’s talk about what tile grout is. , and then let’s talk about how to use tile grout. Is it difficult to use ? Let’s take a look together!
1. What is tile grout
Tile grout is used for gap decoration in ceramic tiles, mosaics, stone, wood boards, glass, aluminum-plastic panels and other materials. Tile grout is often used to tile bathroom and floor tiles.
2. How to use tile grout
1. Pour the special mixing liquid into a clean container, slowly add the caulking agent, and reduce it by half until it becomes a paste with no lumps of dough.
2. Rest for five minutes, then stir. Squeeze the mixed caulking agent into the reserved gap along the diagonal direction of the tile stone without leaving any space.
3. Scrape off the excess slurry at an oblique angle to the gap, being careful to avoid bringing out the slurry embedded in the gap.
4. After the surface is dry, use a sponge, slightly damp cotton cloth or towel to wipe the surface in a circular motion, and further press the caulking agent so that the caulking agent is dense and the surface is smooth.
5. After the caulking agent dries, use a clean cotton cloth to remove the remaining caulking agent.
After reading how to use tile grout above, have you learned? Don't tell me that you'll be done with it as soon as you see it. At this time, a face-covering expression is the most suitable. Just follow the steps above to use it. The five steps are correct. Of course. You should also pay attention to some details. The above content is the article that Zhongtaojun shared with you today about How to use ceramic tile grout? I hope it will be helpful to you! That’s it for today’s sharing, go ahead!
